13/02/20 - prosealed naca vents and doghouse - 2H

Cindy was so kind to prime the little spacers so that I could spend my time today in prosealing the naca vents to the fuselage.

The advantage of having some rivets is that you can use the cleco's to clamp the naca against the skin so there's no need for extra clamps.

Wing tank construction is so long ago that I completly forgot what a mess this proseal makes.

As I had some time left, I also rivetted the small nutplates that came in from aircraft spruce Europe on the fuel pump support brackets.

Some hours later went back and rivetted the vents using the aluminum spacers.

Outside view.

Some more work done on the fuel pump. I drilled the holes for the doghouse cover. See the nutplate templates on the images below.

Then dimpled, deburred and installed the nutplates for the doghouse.


Articles in Fuselage kit

Legal Mumbo-Jumbo

It’s possible (not likely) that I’m not as smart as I think I am. (Occasionally, I have moments when I know this to be true. Fortunately, the feeling passes quickly.) Although I have tried to make this information as accurate as I can, it is not only possible, but also quite likely, that erroneous and misguided information lurks within these pages. I cannot and do not warrant these pages to be error free and correct. Furthermore, I accept no liability for the use of this (mis)information. And, as many would say, your mileage may vary. If, after reading this, you are intent on proceeding, please be aware that the contents of this site are protected by copyright (copyright © 2011 and 2012). Nonetheless, you may copy this material subject to these two conditions: (1) any information used is for non-commercial purposes, and (2) the source of the material is properly credited. Of course, you may link to any page herein. At some articles, snippets of the plans from Vans are visible. These are for educational and illustrations purposes only and should never be used as plans for part construction or assembly as plans may have changed since the picture was taken and more important they are protected by Copyright by the Vans Aircraft Mothership company.