The workshop table has been completed today.

I have now a double table, 90cm wide and totally 4m15 long. I'm pretty pleased with the size.The right part will be dedicated to the machines (bench grinder, band saw, bench drill,...)

As you can see on the picture from the right, I already have some of the required equipment. A bandsaw and band grinder are new. I already had the bench drill.

I also installed some shelves on top of the table to store vise/screw/rivet cabinets. Also and extra day light just over the table and a set of power supplies on the wall where the machines are.

The child in the picture is not a mandatory part of a workshop :). One of my kids just couldn't resist testing the strength of the shelves.

 

Details
Hits: 949

Site Options

All Articles - Newest First
All Articles - Oldest First - Chronologic build
My favorite RV7
How could it ever get to this point
Tools required
Workshop Blog Overview
Primer, primer choices, primer wars...
Training project, self assessment
New Builder Tips
Formalities Regulation
Planning and dreaming

Legal Mumbo-Jumbo

It’s possible (not likely) that I’m not as smart as I think I am. (Occasionally, I have moments when I know this to be true. Fortunately, the feeling passes quickly.) Although I have tried to make this information as accurate as I can, it is not only possible, but also quite likely, that erroneous and misguided information lurks within these pages. I cannot and do not warrant these pages to be error free and correct. Furthermore, I accept no liability for the use of this (mis)information. And, as many would say, your mileage may vary. If, after reading this, you are intent on proceeding, please be aware that the contents of this site are protected by copyright (copyright © 2011 and 2012). Nonetheless, you may copy this material subject to these two conditions: (1) any information used is for non-commercial purposes, and (2) the source of the material is properly credited. Of course, you may link to any page herein. At some articles, snippets of the plans from Vans are visible. These are for educational and illustrations purposes only and should never be used as plans for part construction or assembly as plans may have changed since the picture was taken and more important they are protected by Copyright by the Vans Aircraft Mothership company.